14 5 月 2008

Wet the semi-automatic frequency conversion of one degree of grinding machines of the universe is adjusted and controlled

Submitted by super

Wet the semi-automatic frequency conversion of one degree of grinding machines of the universe is adjusted and controlled
一、First, humidity, TNC of host computer, grind, power 30HP4 frequency converter cooperate PC control and set up very muc. Fix, the linear velocity is cut and ground scarcely.
二、 Second, host computer shell and inside zero main part more for 304 galvanized iron material, make mould shaping.
三、Third, host computer room; Rotate the linear velocity and cut and lack and grind the parts as the white ferroalloy material, hardness HR58 degree, grind the precision.
四、 Fourth, Ling, shell of host computer, but layer is it return water 10 C, host computer room Ling but wind pressure 6 four kg8g to follow, book number of times control, remove host computer to be room screen mesh smooth.
五、 Fifth, 150kg fight trough is it shake horse very much by 2/1HP4 to combine, 10/1 frequency converter cooperate PC control and set up very much by 1HP4, fastenned and sent the raw materials of TNC and entered linear velocity of host computer room to cut and grind scarcely, control the output and detailed degree of finished products.
六、 Sixth, change TNC raw materials variety must wash host computer to be room clean, oil pressure turn on host computer to be room bilateral to rotate linear velocity is it is it grind parts and host computer room screen mesh to lack to cut. Component of the Pu 's 2HP oil pressure pump.
七、Seventh, grind temperature and set up and control shutting down safely, change variety wash and not bilateral to utilize oil pressure operate automatically, turn on host computer grind room check all parts zero knife clean.